China Good quality Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining pulley system

Product Description

Product Description

 

A conveyor will always consist of at least 2 pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.

Different kinds of conveyor pulleys
KONWEYOUR sells conveyor pulleys in all the following sub-categories: 

Head pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and CHINAMFG pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub pulleys

A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.

Drive pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend pulleys

A bend pulley is used for changing the direction of the belt.

Take-up pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.
 

Product Parameters

 

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500

Length of the pulley depends on the belt width of the conveyor 

650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Packaging & Shipping

 

Detailed Photos

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pulley

Can V pulleys be customized for specific machinery and equipment?

Yes, V pulleys can be customized to meet the specific requirements of machinery and equipment. Here’s an explanation of how V pulleys can be customized:

1. Pulley Material:

V pulleys can be customized in terms of material selection. Different materials, such as cast iron, steel, aluminum, and plastic, offer varying levels of strength, durability, and corrosion resistance. The choice of pulley material depends on factors like the application environment, load capacity, and operating conditions. Customizing the pulley material ensures compatibility and optimal performance in specific machinery and equipment.

2. Pulley Dimensions:

The dimensions of V pulleys can be customized to match the requirements of machinery and equipment. This includes the diameter, width, and groove profile of the pulley. By adjusting these dimensions, the pulley can be tailored to provide the desired speed ratio, torque transmission, and belt compatibility. Customizing the pulley dimensions ensures proper power transmission and efficient operation in specific applications.

3. Keyways and Bores:

V pulleys can be customized with keyways and bores to securely fit onto shafts or spindles of machinery and equipment. Keyways are slots on the pulley that align with corresponding key slots on the shaft, preventing slippage and ensuring a positive drive connection. Bores are customized to match the diameter and configuration of the shaft. Customizing keyways and bores allows for a precise and secure fit, eliminating any potential for misalignment or movement during operation.

4. Coatings and Finishes:

V pulleys can be customized with coatings and finishes to enhance their performance and durability. Coatings such as zinc plating or powder coating provide corrosion resistance, protecting the pulley from environmental factors. Finishes like black oxide or anodizing can improve the pulley’s aesthetics and surface hardness. Customizing coatings and finishes ensures the pulleys can withstand the specific operating conditions and extend their service life.

5. Special Features:

In some cases, V pulleys can be customized with special features to meet unique requirements. This may include adding balancing features for high-speed applications, incorporating additional mounting holes or brackets, or modifying the pulley design to accommodate specific accessories or components. Customizing pulleys with special features allows for seamless integration with specific machinery and equipment.

Customization of V pulleys is typically done in collaboration with manufacturers or suppliers who specialize in power transmission components. They can provide engineering expertise and guidance to ensure that the customized pulleys meet the specific requirements and performance expectations of the machinery and equipment.

In conclusion, V pulleys can be customized in terms of material, dimensions, keyways, bores, coatings, finishes, and special features to suit the needs of specific machinery and equipment. Customization ensures compatibility, optimal performance, and reliable power transmission in diverse applications.

pulley

How are V pulleys employed in automotive engines and accessories?

V pulleys play a crucial role in automotive engines and accessories by enabling efficient power transmission and driving various engine components. Here’s a detailed explanation of how V pulleys are employed in automotive engines and accessories:

1. Serpentine Belt System:

Modern automotive engines often utilize a serpentine belt system, which consists of a single, continuous belt that drives multiple engine accessories. The V pulley is a key component in this system, as it provides the necessary driving force for the serpentine belt.

2. Crankshaft Pulley:

The crankshaft pulley is one of the primary V pulleys in an automotive engine. It is connected to the crankshaft, which converts the reciprocating motion of the pistons into rotational motion. The crankshaft pulley drives the serpentine belt, which, in turn, drives various engine accessories.

3. Accessories Driven by V Pulleys:

V pulleys are responsible for driving several important engine accessories, including:

  • Alternator: The alternator generates electrical power to charge the battery and power the vehicle’s electrical systems.
  • Power Steering Pump: The power steering pump provides hydraulic assistance to make steering easier for the driver.
  • Air Conditioning Compressor: The air conditioning compressor pressurizes refrigerant to cool the cabin air.
  • Water Pump: The water pump circulates coolant throughout the engine to maintain optimal operating temperature.
  • Engine Cooling Fan: In some vehicles, the engine cooling fan is driven by a V pulley to regulate the engine temperature.

4. Speed Control and Belt Routing:

V pulleys allow for speed control and belt routing in automotive engines. By using different-sized pulleys, the speed ratio between the crankshaft pulley and the driven accessories can be adjusted. This ensures that the accessories operate at the desired speed for optimal performance.

Additionally, V pulleys and the serpentine belt system allow for efficient belt routing, maximizing the available space in the engine compartment and optimizing the packaging of engine accessories.

5. Tensioning and Belt Alignment:

Proper tensioning and belt alignment are critical for efficient power transmission and preventing belt slippage or premature wear. V pulleys in automotive engines are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the serpentine belt and ensure proper belt alignment.

6. Durability and Maintenance:

V pulleys used in automotive engines are designed to withstand the demanding conditions of engine operation, including high temperatures, vibrations, and continuous rotation. They are typically made of durable materials such as steel or aluminum.

Regular maintenance, including periodic inspection, tension adjustment, and belt replacement, is necessary to ensure the efficient operation of the V pulley system in automotive engines and accessories.

Overall, V pulleys are essential components in automotive engines and accessories, providing reliable power transmission and driving various engine systems. Their design features, combined with the serpentine belt system, contribute to the efficient operation of automotive engines, ensuring optimal performance and functionality of engine accessories.

pulley

What are the primary components and design features of a V pulley?

A V pulley, also known as a V-belt pulley or sheave, consists of several primary components and design features that enable its functionality. Here’s an explanation of the primary components and design features of a V pulley:

1. Body:

The body of a V pulley is the main structural component. It is typically made of metal, such as cast iron or steel, to provide strength and durability. The body is designed to support the V-belt and transmit power from the driving source to the driven component. It may have a solid construction or be split into two halves for easy installation or replacement.

2. Groove:

The groove is a key design feature of a V pulley. It is a V-shaped channel or groove that runs along the outer circumference of the pulley. The groove is specifically designed to accommodate the V-belt with a corresponding trapezoidal cross-section. The V shape of the groove enhances the grip between the pulley and the belt, ensuring efficient power transmission and reducing the risk of slippage.

3. Diameter:

The diameter of a V pulley refers to the distance across its outer circumference. It plays a crucial role in determining the speed ratio and torque transmission of the power transmission system. By changing the diameter of the pulley, different speed ratios can be achieved between the driving source and the driven component. Larger pulley diameters generally result in higher belt speeds and lower torque, while smaller diameters lead to slower belt speeds and higher torque.

4. Number of Grooves:

V pulleys can have a single groove or multiple grooves, depending on the specific application. The number of grooves corresponds to the number of V-belts used in the power transmission system. Multiple grooves allow for the simultaneous power transmission to multiple driven components, such as in systems with multiple accessories or pulleys in automotive engines.

5. Tapered or Straight Design:

V pulleys can have a tapered or straight design, depending on the requirements of the application. Tapered pulleys are wider at one end and narrower at the other, allowing for easier belt installation and improved belt tracking. Straight pulleys have a consistent width along their entire circumference and are commonly used in applications where belt tracking is not a significant concern.

6. Surface Finish:

The surface finish of a V pulley is important for optimizing the performance and lifespan of the V-belt. The pulley’s surface should be smooth and free from any roughness or irregularities that could cause excessive belt wear or damage. Proper surface finish ensures proper belt contact, reduces friction, and enhances the overall efficiency of the power transmission system.

7. Mounting Mechanism:

V pulleys are mounted on shafts or bearings using various mounting mechanisms, such as set screws, bolts, or keyways. The mounting mechanism ensures secure and reliable attachment of the pulley to the rotating shaft, allowing for the transmission of rotational motion and torque.

By considering these primary components and design features, engineers can select and design V pulleys that are suitable for specific applications, ensuring efficient power transmission and reliable operation in mechanical systems.

China Good quality Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   pulley system	China Good quality Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   pulley system
editor by CX

2024-05-06

V Pulley

As one of the v pulley manufacturers, suppliers, and exporters of mechanical products, We offer v pulleys and many others.

Please get in touch with us for details.

Manufacturer supplier and exporter of v pulley.

Recent Posts