China Steel Tail Conveyor Drum Pulley manufacturer

Solution Description

 Steel Tail Conveyor Drum Pulley

one.Driving pulley is the main portion for transmiting the electricity,as per the diferent carying capacities,the drivingpulley can be divided into 3 categones:Light-weight duty,meium responsibility and weighty responsibility,and for the exact same diameter ofthe pulley,there are several different axle diameters and central spans.
The floor teatrment of the drving puley can be sleek metal,hering bone or rhombic rubber lagging,thesmooth steel pulley is obtainable for the spot which environment is little power,smal belt width and dry,theherring bone rubber lagging has a large friction facto,beter anti-slippery and drainage ability,but it has its owndirection,the rhombic rubber lagging is obtainable for twoway running conveyors,the vuicanized rubber laggedpulley are mesty employed for crucial applicatons.
2.The tail pulley is utilized for modifying the course of the belt operating or rising the wrap angle between theconveyor belt and the driving pulley As for every distinct carrying capacities,the bend pulley can be divided into 3 calegories:light responsibility,medium obligation and heaw cluty.The pulley which is used for extending the get in touch with floor,is usualy used for belowor equivalent to 45 diploma bending.The sutace treatment method of the bend puley can be smooth stel and body fat rubber lagging.

Kind Belt width(mm) Standard Diameter(mm) Size(mm)
Drive pulley five hundred five hundred Duration of the pulley relies upon on the belt width of the conveyor
650 five hundred~630
800 630~a thousand
1000 800~1150
1200 800~1150
1400 a thousand~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~five hundred
650 250~630
800 250~1000
one thousand 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 four hundred~1600
2000 five hundred~1600
2200 630~1600
2400 800~1600

 Rewards:

1. Dust-proof & Water-evidence
The speak to-sealing is adopted, which enjoys a lot more superior dustproof and water-proof
2. Low Vibration and Sound
Static stability take a look at to ensure G40 precision stage.
three. Strong Power of Friction
The content for shaft is forged shaft of 40Cr alternatively of #forty five round metal,which increases mechanical property
4. Straightforward Set up & Easy Maintenance
The bearing block and taper-lock are ground, which make sure the set up precision
five. Min 50000 hours support existence

 

one.Raw material manage:
Suppliers are on continuous supervision and assistance,subcontracted components should be a hundred%examined just before implementation.
2.The internal solution:
Strict implementation of processing route.Improving procedure guidance,refining on innerproduct.
three. Assermbly and completion of inspection:
In rigid accordance with the assembling function instruction,stringent inspection process for accuracyand functionality of generation.
4.Solution acceptance:
Strict compliance with the acceptance standards,a extensive overview of the merchandise to ensureproduct experienced.

1.)Pipe: seamless metal : it was precisely minimize by employing the flame reducing device.

2.)The sleeve & disc :it was reduce by making use of the laser cutter device precisely.

 

3.)Shaft: We chose forty five# round metal & sleeve and method the complete shaft so that it ensures shaft concentricity and reduction for the eccentric shaft pressure. It make sure the pulley shift more steady

4.)Bearing set & bearing: large-high quality bearing which is scorching charging and bearing block are outfitted inner bearing enlargement unit, so the bearing can be effortlessly pushed to the bearing position  and it avoids the bearing harm from the beating.

Tests for the pulley

We have the expert screening machine for the pulley.    We require make the removing interior anxiety therapies when the pulley’s stand up to forces exceed 80KN and we will make the static  balance inspection when the belt speed exceeds 2.5m/s.  
And we laso make the Drum dynamic stability take a look at for the pulley to confirm the very good good quality ahead of despatched to the customer.

Packing:
Following all the items tested then make the packing, then the goods set into the warehouse to hold out to ship to the buyer
Our initiatives:
Exhitbition and the customer visiting~
We also go to numerous sorts of relevant exhibitations to know far more our products for the customer. These kinds of as Canton reasonable, buma reasonable andother minging fairs.
Our firm and merchandise get the customer approve and several client vist us and make the orders for us.

Company certification &honor
We have the ISO 9001 certification The goods have obtained different patents. For instance: Trademarks, patents,ects.

Right after sale services
We supply the buyer ideal after sale providers, and we remedy the troubles any time.
 

1)Installation guide

2)Offer drawings and directions

three)On-site assistance of dispatched engineers

four)Solution soon after income:

The machine has a extended guarantee of 2 several years

Roller guarantee 50,000 hrs.

The company introduction:
 HangZhou CZPT conveying Equipment Co.,Ltd was started in 2005.      
It truly is registered cash is eleven.68million CNY and It is non-public joint-stock company. Our primary items are cnoveyor roller,loafer,body, pulley,belt and belt conveyor method for TD75 ,DTII,DTIIA,CEMA ects.
we has huge lathes, numerical control, double pressing equipment, double welding equipment, double boring lathe, milling equipment, sawing device and so on. The goods have obtained a variety of patents. We can produce far more than 1 thousand rollers and ten pulleys for each working day.
We have the professionalQC dept. to preserve the good top quality before the goods sent out. The items are sold to Center East,Africa ,Australia,Europe,Southeast Asia,Russia and some other countries and regions. We will Improve the internal management and enhance our products’ quality continually.We will provide the very best products for customers from the commencing to the stop.


FAQ

1.Q: Your bearing sort and brand normally use? 
 A:Huge ball bearing kind deep ball bearing withSRB, and in accordance to customer’s specifications. 

two.Q: How is your Payment Expression? 
A: T/T or L/C. Yet another payment expression we can also examine. 

three.Q: Can you personalize it? 
A: We support customization in accordance to your ask for. 

four.Q: What is the MOQ? 
A: 3 piece. 

five.Q: What’s the production ability of your conveyor pulley? 
20 pcs/working day.

six.Q: What’s your roller’s life span?
Our pulley have a long life span with great functionality and normally
make positive 30000 to 50000 hours under the regular web site and operation.

Speak to us: 
Contact man or woman: Sunny Li
 

 

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: No Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:

###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600
Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: No Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:

###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Types of Pulley Systems

If you’ve ever tried to lift a pail of water, you’ve probably seen the pulley system in action. Pulleys are extremely useful tools for everything from household appliances to heavy industrial machinery. Different kinds of pulley systems are classified according to their amount of motion. Some types have fixed axes, while others have movable axes. Some common uses of pulleys are listed below.

two-wheel pulley

Pulleys are complex structures with thin-walled and thick-walled sections. Therefore, they require specific forging designs. The tool concept for the production of pulleys is shown in Figure 11.6. Using the generated tool, the pulley can be forged into different shapes. Process parameters must be optimized based on material, surface quality and metallographic analysis.
Pulleys are wheels mounted on shafts. Its main function is to assist the movement of heavy objects. A single-wheel pulley can change the direction of the force, enabling a person to pull heavy objects. A dual-wheel pulley distributes the weight evenly across both wheels, allowing it to lift the same weight with half the effort.
The mechanical advantage of a two-wheel pulley is that it reduces the force required by about half. A 100 kg object can be lifted with a force of 500 Newtons. The mechanical advantage of a pulley with two wheels is twice that of a single-wheel pulley. However, care should always be taken when using two-wheel pulleys.
Two-wheel pulleys can be fixed or movable. A single wheel pulley can only change direction when the load is placed on one side of the wheel. Two-wheel pulleys change direction when lifting a load, requiring half the force. Live wheels are better for heavier loads. The movable pulley can be adjusted with the load, and the load distribution is more uniform. Active pulleys can be used with single-rope or two-wheel pulleys.
A pulley system with two wheels is called a compound pulley. This type of pulley system has a complex design that reduces the force required to move the load. Two-wheel pulleys are common in industrial and construction environments. These pulleys require a lot of space to install and operate. Additionally, they require regular maintenance to avoid wear and tear.
pulley

composite pulley

Compound pulleys are used to increase lift. One fixed pulley is attached to the overhead while the other fixed pulley is attached to the load. This setup minimizes the force required to lift weights, allowing you to lift heavier weights. There are several different types of compound pulleys, each with their own strengths and weaknesses. Below are some examples of their application. Some of the most common are listed below.
Composite pulleys are usually made from two different types of wheels. The first one is fixed and secure. The second type, movable, is attached to something that moves. The third type, compound pulley, is a combination of a movable pulley and a fixed pulley. Below are three types of comparisons. The table below compares them and explains their advantages and disadvantages. Composite pulleys are the most versatile of the three.
The number of sheave segments that make up the composite sheave system increases the mechanical advantage of the system. Each segment adds one percent of the total weight, and the ideal mechanical advantage is two or more. So a compound pulley with four segments will lift three-quarters of the weight. This is because the force applied to the load is multiplied by four. The result is a better boost.
While composite pulleys have many uses, they are most commonly used on larger sailboats. These pulleys work by changing the direction of the control wire or by changing the mechanical force of the rope. They also make it easier to lift heavier objects. Composite pulleys are more expensive than simple pulleys, so consider your needs before buying. The advantages of composite pulleys outweigh the disadvantages.
A basic compound pulley is a device consisting of two wheels with fixed points. Ropes are looped around the wheels and are used to lift heavy objects. When you pull on the rope, the rope pulls the two wheels closer together. Serious injury could result if this equipment is installed incorrectly. Never exceed the lifting capacity of pulleys and other safety devices that may be attached. When using pulleys, be sure to follow the instructions on the mounting hardware to avoid accidents.
pulley

Fixed pulley

Moving pulleys and fixed pulleys are different types of mechanical devices. The movable pulley moves with the object it is used to lift. Because it attaches to the object it is used to lift, it is great for lifting heavy objects. These devices are used in construction cranes and multipurpose elevators. There are many different types of pulleys, and their uses vary widely. Below is a brief overview of these devices.
The simplest pulley set consists of a wheel that is mounted on the ceiling. A rope is attached at one end and a person pulls at the other end. The rope is strong enough to keep a person standing while lifting weights. It takes about 200 Newtons of force to lift a 20 kg weight. In contrast, a movable pulley requires a force of 1000N, which makes it easier to lift heavy objects.
Fixed pulleys are another common lifting device. They work by using ropes and slotted wheels attached to the object to be lifted. These devices are convenient to use because they are easy to set up. Moving the scroll wheel doesn’t change direction, so it’s easier to move objects without putting too much pressure on the back. Unlike a moving rope, a moving object will feel much lighter than its actual weight.
Fixed pulleys are widely used in construction and agriculture. Fixed pulleys can help lift supplies and equipment from scaffolding. These items are often heavy and difficult to lift directly. Fixed pulleys at the top of the scaffolding will allow people at the bottom to lift objects more easily. As a result, those at the bottom are less stressed and more productive. Fixed pulleys will save time and money compared to moving ropes.
Composite pulleys combine fixed and movable pulleys to increase the power of movement. A compound pulley system uses both types of pulleys and enables a person to change direction by reversing the direction of a force. The compound pulley system will save time and effort as the user only has to put in half the effort. Unlike moving ropes, composite pulleys are easy to adjust and are the most versatile system on the market.
pulley

Blocks and tackles

A pulley block system is a rope hoist that uses a set of pulleys mounted on a frame. The blocks are arranged in a row, and the threaded rope is called a pulley. Pulley systems help amplify the tension of the rope and are common in sailboats, cranes and drilling rigs. However, these systems are not without drawbacks.
The pulley pulley system can be equipped with as many pulleys as required. This method allows a person to lift heavy objects. The pulley block system can contain the required number of pulleys to achieve the desired height. The main disadvantage of pulley systems is that they create a lot of friction on the pulley shaft.
Pulley systems use two types of pulleys. A movable pulley is attached to the load, allowing it to move with the load. On the other hand, fixed pulleys are fixed on fixed points. Therefore, a pulley block system may consist of multiple pulleys mounted on a shaft. For example, the two pulleys attached to the shaft each have their own mechanical advantages.
Several types of tackle systems have been developed in recent centuries. The most basic is the gun mount, which uses two pulleys to lift the load. The mechanical advantage of such a system is two to three times the distance required by the rope to move the load. Depending on how they’re assembled, the system can lift 400 pounds with 80 or 100 pounds of force.
Another type of pulley is a combination of multiple wheels. The wheels on pulleys are supported by a housing or frame. The chain is attached to the pulley, and the rope is pulled to lift it. A combined pulley system will have multiple wheels. As the load increases, the force on the pulley also increases. This approach is generally more expensive than intercept and intercept systems.

China Steel Tail Conveyor Drum Pulley     manufacturer China Steel Tail Conveyor Drum Pulley     manufacturer
editor by czh 2023-01-01

V Pulley

As one of the v pulley manufacturers, suppliers, and exporters of mechanical products, We offer v pulleys and many others.

Please get in touch with us for details.

Manufacturer supplier and exporter of v pulley.

Recent Posts