Product Description
High Performance Pulley for Belt Conveyors
BRIEF INTRODUCTION
Our company has adopted proprietary technology and equipment imported from German PWH company for the design and manufacturing of various pulleys . As a key component of the conveyor, the pulley should have high reliability. Our company’s R&D center has improved the pulley structure, reduced structural stress, and increased the lifespan and reliability of the pulley group through finite element analysis and optimization calculations. Our company’s pulley is manufactured from specialized high-end manufacturing equipment and has achieved serialized and large-scale production.
We have produced conveyor pulleys for belt width up to 2.4 m, pulley diameter up to 1.8 m, and maximum tension up to 300 tons.
PRODUCT INFORMAITON
Product Name | Pulley |
Adhesive Material | smooth, ordinary rubber, wear-resistant rubber, UHMW-PE, rubber ceramic, etc.. |
Adehensive Treatment | glued or casted |
Carrying Capacity | light, medium and heavy type |
Connection Mode | Shafts and wheels of the medium and heavy-duty pulley are connected by expansion sleeves. |
Pulley Pipe | made of Q235B carbon steel, with high roundness and straightness ensuring rotation balance |
Shaft | 45 # round steel or according to your requirements; ultrasonic inspection, quenching and tempering treatment, strict control of key fit size tolerances, greatly extending service life. |
Bearing Brands | Havalo, SKF, FAG, SNK or according to your requirements |
Bear Seat | Integral bearing seat, partial bearing seat |
Color | bright red paint or according to your requirements |
VARIOUS TYPES OF PULLEY ADHESIVE SURFACE
BEARING SEAT MODE
TECHNICAL SPECIFICATIONS & PARAMETERS
Technical Parameters for Belt Conveyor Pulley | ||||||
Belt Width (mm) | Pulley Standard Diameter without Adhesive Layer(mm) | |||||
650 | 200,250,320,400,500,630 | |||||
800 | 200,250,320,400,500,630,800,1000,1250 | |||||
1000 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
1200 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
1400 | 320,400,500,630,800,1000,1250,1400,1600 | |||||
1600 | 400,500,630,800,1000,1250,1400,1600 | |||||
1800 | 250,400,500,630,800,1000,1250,1400,1600 | |||||
2000 | 400,500,630,800,1000,1250,1400,1600 |
Technical Parameters | ||
1 | Outer Circle Diameter D Deviation | 200 ≤ 1.5 400 ≤ 2.0 1000 ≤ 2.5 |
2 | Radial Runout of Outer Circle | D ≤ 200 ; without adhesive 0.3 ;with adhesive 0.5 200 < D ≤ 800 ; without adhesive 0.6; with adhesive 1.1 800 < D ≤ 1600 ; without adhesive 1.0; with adhesive 1.5 1600 < D ≤ 1800 ; without adhesive 1.5; with adhesive 2.0 |
3 | Static Balance Accuracy | G40 |
PROCESS FLOW OF PULLEY
Our company is equipped with necessary equipment for processing pulleys, such as large oil pressure machines, rolling machines, specialized pulley automatic explosive welding operators, large diameter lathes, boring machines, ultrasonic flaw detectors, static balancing devices, pressure casting machines, etc. Due to the special correction process adopted by the company, the pulley pipe skin is rounded before processing, and the pulley pipe wall is uniform after processing, thereby ensuring that the pulley has high static balance performance and high mechanical performance.
PRODUCT FEATURES
For pulleys with complex forces, large loads and used in heavy working conditions, they all adopt a cast welded structure and expansion sleeve connection. Compared with traditional drums in China, this type of drum mainly has the following characteristics :
(1) The structural parameters of the pulley are advanced and reasonable, and there is a dedicated computer calculation program to determine the shaft diameter, cylinder skin thickness, wheel amplitude plate shape and spacing, as well as the position of the circumferential weld seam set at the position where the stress is minimum and the number of cycles is minimum.
(2) The key technology of using single sided welding and double sided forming ensures the quality of the weld seam.
(3) The expansion sleeve connection is used between the drum hub and shaft, which not only solves the problem of key connection stress concentration that has been existing for many years and the technical difficulties of manufacturing and installing axial double keyways, but also achieves overall quenching and eliminates welding internal stress.
(4) The circumferential and longitudinal welds of the pulley have undergone non-destructive testing, and the casting quality of the wheel hub has undergone magnetic particle or ultrasonic testing.
(5) The total radial runout of the outer circle after roller casting is less than 1mm.
(6) All drums undergo static balance tests before leaving the factory to achieve G40 accuracy.
(7) All driving pulley and directional pulley with high stress have undergone finite element analysis to ensure that the stress and strain of the rollers meet the requirements.
Due to a series of measures taken, the pulley group produced by SK has a reasonable structure, large bearing capacity, and reliable performance. And it overcomes the problem of fatigue fracture at the welding seam of the existing pulley plate in China. The pullley (including the welding part) is guaranteed to have a rotational fatigue strength of over 108°.
WORKSHOP OF FINISHED PULLEIES
PACKAGE AND DELIVEYR
APPLICATION INDUSTRIES
CONVEYORS EPC/BOT CONTRACTING CAPABILITY
VARIOUS CONVEYOR SPARE PARTS SUPPLY
AERIAL VIEW OF OUR FACTORY
INTELLIGENT PRODUCTION & TESTING
CERTIFICATES & HORNORS
BRANCHES & OFFICES
TEAM BUILDING
LONG-TERM STRATEGIC COOPEATORS
MAIN CUSTOMERS
CUSTOMERS VISITS
DOMESTIC & OVERSEAS EXHIBITIONS
SINGING CEREMONY
GLOBAL BUSINESS NETWORK
B /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Certification: | CE, ISO |
---|---|
Pulley Sizes: | Kk |
Manufacturing Process: | Forging, Casting |
Material: | Carbon Steel |
Surface Treatment: | Smooth, Rubber or Ceramics |
Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant, Port, Dock, Energy, Cement, Metallurgy, Steel |
Samples: |
US$ 7/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What safety considerations should be kept in mind when working with V pulleys?
Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:
1. Proper Guarding:
Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.
2. Lockout/Tagout Procedures:
Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.
4. Training and Education:
Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.
5. Inspection and Maintenance:
Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.
6. Load and Speed Limits:
Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.
7. Risk Assessment:
Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.
It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.
How are V pulleys employed in automotive engines and accessories?
V pulleys play a crucial role in automotive engines and accessories by enabling efficient power transmission and driving various engine components. Here’s a detailed explanation of how V pulleys are employed in automotive engines and accessories:
1. Serpentine Belt System:
Modern automotive engines often utilize a serpentine belt system, which consists of a single, continuous belt that drives multiple engine accessories. The V pulley is a key component in this system, as it provides the necessary driving force for the serpentine belt.
2. Crankshaft Pulley:
The crankshaft pulley is one of the primary V pulleys in an automotive engine. It is connected to the crankshaft, which converts the reciprocating motion of the pistons into rotational motion. The crankshaft pulley drives the serpentine belt, which, in turn, drives various engine accessories.
3. Accessories Driven by V Pulleys:
V pulleys are responsible for driving several important engine accessories, including:
- Alternator: The alternator generates electrical power to charge the battery and power the vehicle’s electrical systems.
- Power Steering Pump: The power steering pump provides hydraulic assistance to make steering easier for the driver.
- Air Conditioning Compressor: The air conditioning compressor pressurizes refrigerant to cool the cabin air.
- Water Pump: The water pump circulates coolant throughout the engine to maintain optimal operating temperature.
- Engine Cooling Fan: In some vehicles, the engine cooling fan is driven by a V pulley to regulate the engine temperature.
4. Speed Control and Belt Routing:
V pulleys allow for speed control and belt routing in automotive engines. By using different-sized pulleys, the speed ratio between the crankshaft pulley and the driven accessories can be adjusted. This ensures that the accessories operate at the desired speed for optimal performance.
Additionally, V pulleys and the serpentine belt system allow for efficient belt routing, maximizing the available space in the engine compartment and optimizing the packaging of engine accessories.
5. Tensioning and Belt Alignment:
Proper tensioning and belt alignment are critical for efficient power transmission and preventing belt slippage or premature wear. V pulleys in automotive engines are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the serpentine belt and ensure proper belt alignment.
6. Durability and Maintenance:
V pulleys used in automotive engines are designed to withstand the demanding conditions of engine operation, including high temperatures, vibrations, and continuous rotation. They are typically made of durable materials such as steel or aluminum.
Regular maintenance, including periodic inspection, tension adjustment, and belt replacement, is necessary to ensure the efficient operation of the V pulley system in automotive engines and accessories.
Overall, V pulleys are essential components in automotive engines and accessories, providing reliable power transmission and driving various engine systems. Their design features, combined with the serpentine belt system, contribute to the efficient operation of automotive engines, ensuring optimal performance and functionality of engine accessories.
What advantages do V pulleys offer for power transmission?
V pulleys, also known as V-belt pulleys or sheaves, offer several advantages for power transmission in various applications. Here’s an explanation of the advantages provided by V pulleys:
1. High Efficiency:
V pulleys provide high efficiency in power transmission. The V-shaped groove on the pulley and the corresponding trapezoidal cross-section of the V-belt create a wedging action that enhances the grip between the pulley and the belt. This improved grip minimizes slippage and ensures efficient power transfer, resulting in higher overall system efficiency.
2. Wide Speed Range:
V pulleys offer a wide speed range capability. By using different-sized pulleys, the speed ratio between the driving source and the driven component can be adjusted. This flexibility allows for the adaptation of power transmission systems to meet specific speed requirements, enabling optimal operation in various applications.
3. Shock and Vibration Dampening:
V pulleys have inherent shock and vibration dampening properties. The elasticity of the V-belt absorbs shocks and vibrations, reducing their transmission to the driven components. This feature helps to protect the machinery and equipment from excessive wear and damage, enhancing their reliability and lifespan.
4. Compact Design:
V pulleys offer a compact design compared to other types of pulleys. The V-belt drive system requires less space, making it suitable for applications where space constraints exist. The compact design also allows for efficient power transmission in tight or confined areas.
5. Cost-Effective:
V pulleys are cost-effective compared to other power transmission systems. They are relatively simple in design and construction, making them more affordable to manufacture, install, and maintain. Additionally, V-belts have a longer service life compared to other types of belts, reducing the frequency and cost of replacement.
6. Easy Installation and Maintenance:
V pulleys are easy to install and maintain. The split design of some V pulleys allows for easy installation or replacement without the need to disassemble the entire system. Additionally, V-belts are generally easy to tension and adjust, simplifying maintenance tasks and reducing downtime.
7. Versatility:
V pulleys offer versatility in power transmission applications. They can accommodate a wide range of power requirements, making them suitable for various industries and systems. Additionally, V pulleys can transmit power over long distances without a significant loss in efficiency, allowing for flexibility in system design and layout.
These advantages make V pulleys a popular choice for power transmission in a wide range of applications. Their high efficiency, speed range capability, shock absorption, compact design, cost-effectiveness, ease of installation and maintenance, and versatility contribute to their widespread use in numerous industries and machinery.
editor by CX
2024-05-09